Which waste valve you'll need for your black water tank on your RV depends on the fitting that you have on your vehicle currently. As an example, if you have a male threaded hose that fits over the waste valve you'll want to use the Valterra Waste Valve for RV Black Water Tank - 3" MPT to 3" Lug # T50C. I've linked our selection of waste valves to this answer that will allow you to choose the appropriate connection. It is recommended that you use Valterra ABS Solvent # A05-0303 to complete... view full answer...
In order to determine the correct waste valve for your 2012 MVP Destiny 5th Wheel you will need to just figure out weather or not the valve you're replacing slid over your pipe or into your pipe.
If your valve slid into your sewer pipe, then you'll need the Valterra Bladex Waste Valve for RV Black Water Tank # T40A,
If your valve slide over your pipe, then you'll need the Valterra Bladex Waste Valve for RV Black Water Tank # T40B,
Or,
If one end slid into a pipe, and one end slid over... view full answer...
Yes, the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank # 34466N4AB96GMA will work with your 24 CSA Z240.3.2 setup as this waste valve is compatible with 3" diameter black-water sewer pipe.
If you're referring to replacing your 24 CSA Z240.3.2 waste valve, I recommend going with the:
-Valterra Waste Valve for RV Black Water Tank # T50A instead.
This is virtually the same waste valve as your 24 CSA Z240.3.2, but does not have the 96" long pull cable that # 34466N4AB96GMA... view full answer...
It sounds like you're looking for the Double RV Waste Valves # T84B which includes two 3" cable actuated spigots for two separate black water lines.
If you're looking for something else feel free to come back and we'll take care of you. view full answer...
The standard size of a water drain valve for grey tanks on most RV's is 1-1/2". For this 1-1/2" drain valve, I have three options for you to consider. The first option is the Valterra Waste Valve for RV Gray Water Tank part # T1001PBC. This valve does not include the pull handle. You will need the Valterra Cable with Valve Handle part # TC72PB in order to operate this valve.
The next option with a plastic pull handle included is our Valterra RV Waste Valve part # T1001B. The last option... view full answer...
The type of cable you need for your gray water waste valve depends on which type of valve you have installed on your RV. If you have a Valterra valve, the Valterra Cable with Valve Handle - 72" # TC72PB works great. This valve is also sold without the handle as part # T1001PBC. In order to install the valve, you do need the Valterra ABS Solvent Cement - 1/4 Pint # A05-0303.
You can indeed tell by looking at the handle. The LaSalle Bristol cable has angled edges. I went ahead and attached... view full answer...
The closest I was able to find to what you need for your 2" valve on your grey tank, is the:
-LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank # 34466N11AB36GM.
This cable actuated waste valve is American made, has a 36" pull cable like you mentioned you needed, however, it is designed to work on 1-1/2" piping.
I took a look, and we unfortunately do not carry a cable actuated waste valve for your grey tank that matches the 2" pipe you have, and has the 36" long cable... view full answer...
From what I can gather it sounds to me like you need the Valterra Eccentric Tank Reducer - RV Gray Water - 3" Spigot to 1-1/2" Hub # T1041-1. The 3" Spigot mounts directly in the gray water tank outlet while the 1-1/2" Hub slides over sewer pipe.
Then for a 1-1/2" diameter gray-water sewer pipe we have the LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank. This is valve is available in with cables that are numerous lengths, which I'll list for you so you can choose the... view full answer...
The Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1 is not available in white, however you could either just paint it white or use the Replacement Handle for LaSalle Bristol Waste Valves # LSB97FR. view full answer...
It sounds like you're looking a for a new valve assembly for your black water tank. For a black water waste valve for a standard 3-inch diameter twist-on bayonet/lug fitting you can use Valterra part # T58.
If your RV instead has a straight sewer pipe you can use the slide-on Valterra valve # T50. This item must be glued on using Valterra ABS cement # A05-0303. view full answer...
The specific fittings and valves you need will ultimately depend on the kind of grey water tank that you plan on adding to your enclosed trailer. If there are threaded fittings or specific diameter openings on your tank, you will need to find the compatible fittings.
For a waste valve you can use something like the Valterra Twist on Waste Valve # T58. This will not be glued on because it is designed to attach to the RV side and the waste tube with bayonet adapters like the Valterra #... view full answer...
From the looks of your attached photo, you need a black water and gray water elbow valve for your trailer. The closest thing we have for the setup is the Bristol Double RV Waste Valves - Elbow - Rotating - 3" Spigot and 1.5" Hub to 3" Lug # 34466ND13BAR. This part comes with a 3" waste water valve and a 1-1/2" gray water valve. I recommend making sure that these valve diameters are compatible with your setup. The valve handles rotate so you can set them to an easy point of access.
I went... view full answer...
For your 2009 Coachman you can use the Valterra Waste Valve for RV Gray Water Tank # T1001B. This replacement valve will work great with your 1 1/2" grey water tank, and measures 8-3/4" with the valve open and 6-5/8" with the valve closed.
Also, unfortunately all of our 1 1/2" valves are going to be cable actuated so you aren't going to be able to get away from that. view full answer...
It appears that you will only need the Valterra Street DWV Fitting # D50-2890 to be able to install the Double RV Waste Valves # TR38 on your sewer system. The main Y of the assembly is likely identical to yours with the waste valves attached to the ends. You will likely be able to cut the ABS pipe at the end of the couplers and not need to extend any of your lines as the waste valve will make up for the portion that you cut off.
I have attached a image with the dimensions of the coupler... view full answer...
For your Valterra Bladex Waste Valve Body for RV Black Water Tank w/ Drilled Stem # T1003DSPB you'll just need the Valterra Cable with Valve Handle # TC120PB. view full answer...
We don't know for sure what parts come on specific coaches, but we do carry some different handles that might work for you. If you've got a handle that screws in from the top then you can use the Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1, and if you've got a handle that screws directly onto the valve cable post then you'll want to use the Replacement Handle for Bladex and Valterra Waste Valves - Threaded - Plastic - Black # T1003-6NVP.
If you've... view full answer...
It sounds like you're looking for the LaSalle Bristol Double RV Waste Valves - Sanitation Tee # 34466ND15AAR.
This tee has a 3" hub that'll slide over your main 3" black waste spigot, and also includes a 1-1/2" that will go to your grey water line. view full answer...
It sounds like you might want to have a look at the Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Lug # 34466ND13AAR, which would allow you to dump your black and gray water tanks from the same hose. This elbow fitting connects to the 3" hub on your black water drain pipe and the 1-1/2" hub on your gray water tank, and allows you to use the # F02-3112CL with your 3" spigot connection hose.
You'll need to remove your old valves to install the Bristol Double... view full answer...
The Replacement Waste Valve Handle # T1003-6NVP will fit on the old style or the new style because the threads are the same. The look is just a little different. I confirmed this with Valterra. view full answer...
The closest we have to what you're looking for is a combinations of parts:
- Valterra Waste Valve for RV Black Water Tank - 3" FPT to 3" Lug # T50B
- RhinoFLEX 90 Degree Elbow Fitting # CAM39485
Normally a 90 degree fitting is before of after the valve which is why we don't have any with this specific setup. view full answer...
Go To Results